Line-interactive UPS 1000 VA LCD

SYSTEM OVERVIEW

Voltage compatibility

230V AC

Frequency compatibility

50/60

OUTPUT

Output VA

1000

Output watts

500

Output nominal voltage

230V AC

Output voltage regulation

BATTERY MODE: PWM sine wave 230V +/-5%

Output frequency regulation

LINE MODE: Passes line frequency of 50/60Hz +/-10% BATTERY MODE: Inverter output regulated to 50/60Hz +/-0.5Hz

Outlet quantity / type

6 x IEC-C13

INPUT

Maximum input amps

10A

Input connection type

IEC-C14

Input cord length

User supplies input cord; 2 x 6-ft./1.8m C13-to-C14 power cables included

BATTERY

Full load runtime

3 min. (1000VA / 500w)

Half load runtime

11 min. (500VA / 250w)

DC system voltage

24V DC

VOLTAGE REGULATION

Voltage regulation description

Line-interactive voltage regulation corrects brownouts as low as 171V back to usable values

Brownout correction

Input voltages between 199V and 171V are boosted by 14%

LEDS ALARMS & SWITCHES

Front panel LEDs

Front panel LCD screen with blue backlight offers continuous input line voltage data, plus line power status, battery power status, battery charge level and voltage regulation operation

Alarms

Audible alarm with 15-sec. delay sounds to indicate loss of utility power. Alarm can be silenced by pressing front panel alarm cancel button. Once silenced, alarm will re-sound when approximately 2 min. full load runtime remain.

Switches

Includes 2 front panel switchesone main on/off power switch and one dual function alarm cancel/self test button

SURGE / NOISE SUPPRESSION

AC surge suppression

480 joules

AC suppression response time

Instantaneous

Dataline suppression

Single line tel/DSL surge suppression with RJ-style phone connectors (center 2 wires protected, 260V clamping); includes phone cable

EMI / RFI AC noise suppression

Yes

ENVIRONMENTAL

Operating Temperature

+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius

Storage Temperature

+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius

Relative Humidity

0 to 95%, non-condensing

COMMUNICATIONS

Network monitoring port

Single built-in USB port supports on battery, low battery and power restored messaging. Interface supports timed inverter shutoff after unattended shutdown. Compatible with Tripp Lite's PowerAlert and Watchdog service software.

Software and cabling included

USB cabling included, PowerAlert Software available for free download at www.tripplite.com

SNMP compatibility

Includes slot for optional SNMPWEBCARD accessory

WatchDog compatibility

Compatible with Tripp Lite's Watchdog system service to restore operation to locked equipment through soft reboot of application/OS or hard power off/on reboot of connected equipment; ideal for unattended kiosk applications

LINE / BATTERY TRANSFER

Transfer time from line power to battery mode

2-4 milliseconds

Low voltage transfer to battery power

Switches to battery power as line voltage decreases to 171V or lower, switches back to AC mode as line voltage increases to 180V or higher

High voltage transfer to battery power

Switches to battery mode as line voltage increases to 266V or higher, switches back to AC mode as line voltage decreases to 259V or lower

CERTIFICATIONS

Certifications

CE (IEC 62040), GOST, SASO, CE Class B (Emissions), RoHS compliant